AFE BMW Performance Intake Kits

This Stage 2 cold air intake system produces 12 max horsepower, 16 lbs. x ft. torque and out-flowed the factory intake by 56%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.

This part fits the following BMWs:
2008-2013 E82/88 128i
2006 E90/91 325i/xi
2006 E90/91/92/93 330i/xi
2007-2013 E90/91/92/93 328i/xi
 

BMW E60 E61 N52 Cold Air Intake System aFe Magnum FORCE Stage-2 Pro 5R is designed to significantly enhance the performance of your BMW by replacing the restrictive factory air box. This intake system features a 1.6mm powder-coated steel heat shield and a heat-resistant molded intake tube, which is trim-sealed to prevent hot engine air from entering. The kit includes a custom aFe brand Pro 5R cotton filter, known for its high airflow and exceptional filtration.

• Enhanced Airflow: The Pro 5R filter media, lightly oiled gauze, maximizes airflow to the engine, improving horsepower and torque.
• Improved Performance: Removal of the restrictive factory air box increases acceleration and throttle response.
• Durable Construction: The 1.6mm powder-coated steel heat shield and molded intake tube provide long-lasting durability and protection.
• Custom Fit: Designed specifically for the BMW E60 525i and 530i models from 2006-2007.

This intake system is a high-performance upgrade that enhances engine efficiency and driving experience. For installation instructions, please refer to the provided link.

AFE Summer Rebate Form

This Stage 2 cold air intake system produces 12 max horsepower, 16 lbs. x ft. torque and out-flowed the factory intake by 56%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.

Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

By removing your stock intake air box, you are removing the most restrictive portion of your M3's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

12 hp gain at 4900 rpm!
11 lb/ft torque at 4900rpm!

This aFe intake fits the following BMWs:
E46 3 series: M3 Coupe, M3 Convertible

 

Click here for a detailed press sheet

Clickhere for installation instructions.

This Stage 2 cold air intake system produces 11 max horsepower, 14 lbs. x ft. torque and out-flowed the factory intake by 47%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.

Large Air Filter:
Large 7" Tall Conical Filter with a 3-1/2" flange opening provides 47% greater airflow over Stock intake system. This washable/reusable 5-layer progressively finer mesh cotton gauze oiled media air filter provides maximum airflow for increased horsepower and torque.

Mandrel-Bent Tubing:
A 3" One-Piece Mandrel-Bent Wrinkle-Black Powder-Coated Intake Tube directs unrestricted airflow from the massive filter to the turbo for more horsepower and torque.

One-Piece Heat Shield:
Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation.

Hassle-Free Installation: 
All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

This System Fits:
sDrive28i
xDrive28i

This all-new Momentum Sealed Intake System produced 10hp and 14lbs. x ft. torque and outflows the factory intake by 42%. This system uses a PRO DRY S progressive mesh three layer synthetic "oil-free" filter for maximum airflow and convenience. Also included is a unique, patent-pending sealed airbox design to increase airflow using the factory air ram air scoop for maximum torque in all weather situations. The kit comes complete will all necessary hardware. Note: Does not fit vehicle with N26 engine. N26 engine is SULEV (super low emission) version of N20

3-1/2"Conical Pro 5R Air Filter: This intake utilizes a huge, 3-1/2" tall conical PRO 5R performance air filter for increased performance. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings.

One-Piece Filter Housing: The air filter is housed in a one-piece, patent-pending black roto-molded airbox that keeps warm engine air out for maximum performance. This one-piece airbox uses factory mounting locations for a hassle-free installation.

Dyno Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.

Horizontal Louvers: The louvers were added to the roto-molded airbox to increase the cold air to the air filter.

Fits the Following BMWs:

F30 320i 320xi 328i 328xi

Unique One-Piece High-Quality Housing:
A custom CAD designed roto-molded housing made of black, cross-linked, heat resistant polyethylene material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The auxiliary air inlet allows for the maximum amount of air available for the intake.

High-Quality Tube:
This system uses a high-quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.

Large 5-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 4" flange and is 6-1/2" tall. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media for better air flow, and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.

Premium Hardware:
Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
2011-2013 E82/88 135i N55
2011-2013 E9X 335i N55
2011-2015 E84 X1 35i

AFE Summer Rebate Form

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 28 horsepower and 31 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

AFE Summer Rebate Form

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 11 horsepower and 13 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

This Torque Booster tube is a great upgrade to your Stage 1 air intake, and can even be used to upgrade your factory intake system. Constructed of 3-ply silicone, it's smoother for less turbulence and more durable for less maintenance. 

• Works with stock airbox or upgrade your Stage 1 intake to a Stage 2
• Insualtes against heat
• Silicone tube smooths out airflow
• Reduced air turbulence results in more power

Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.

This part fits the following BMWs:
2001-2007 E46 M3

Unique One-Piece High Quality Housing w/ Carbon Fiber Accents:
A custom CAD designed roto-molded one-piece housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air scoop. Carbon Fiber Accents are provided for car show quality and to further distinguish your vehicle from others.

Hiqh Quality Tube:
This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Mounting tabs are molded in for easy installation.

Large 3-Layer "Oil-Free" Performance Air Filter:
This sealed intake system utilizes an oil-free, large 6-1/2" tall oval 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience. The unique air filter-to-housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware: 
Premium stainless steel hardware and clamp are used to securely mount the high flow air filter and the intake tube. This sealed intake system is designed with fewer parts for a quick and simple installation.

Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

HP Gain: +13hp
Trq Gain: +13ft-lbs
Airflow: +28% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The B58 3.0L Turbo benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Features:

• +13 HP and +13 lbs. x ft. Torque max gains
• Outflows factory intake by up to 28%
• High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Scoop
• CAD-Designed Roto-Molded Intake Tube
• Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance
• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
• No Cutting or Drilling on factory Parts for Faster Installation