BMW Suspension Parts for BMW E52 Z8 S62 5.0L

Adjustable Rebound Damping

This system intended for the experienced  driver who wants to determine the individual lowering of his vehicle, and also wants to make setup adjustments. The adjustable rebound damper allows adjusting the pitch and roll of the car and therefore the driving pleasure can be adapted to your requirements.

• Individually adjustable rebound
• Stainless steel technology "inox-line"
• Individually height-adjustable - Front - 25-45mm, Rear - 25-45mm
• TUV approved lowering range
• High-quality component parts for long durability

When using original tires, wheel spacers may be required

FREE FEDEX GROUND SHIPPING!
FREE FEDEX GROUND shipping within the 48 contiguous states. 

This item fits the following BMWs:
2000-2003 E52 BMW Z8 Roadster

This is a small, 'dogbone' shaped piece that runs from the rear lower control arm to the hub. The lower outer ball joint is mounted in the same location and this is often replaced with the ball joint.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Brand: Lemforder (OEM)
Price is for each - order 2 to replace both on the car.
This item fits the following BMWs:
1995-2001 E38 BMW 740i 740il 750il
1997-2003 E39 BMW 525i 528i 530i 540i M5
2000-2003 E52 BMW Z8 Roadster
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li

BMW E39 E52 Upper Front Strut Mount - Each is a critical component designed to ensure the proper functioning of your vehicle's suspension system. It is essential to replace the strut mount bearings whenever you are changing the strut assembly or shocks. Symptoms of a failing strut mount include a knocking noise when driving over bumps or difficulty steering, indicating that the strut bearing may be worn out. This upper front strut mount offers a reliable solution to restore optimal performance and handling to your BMW.

• Enhanced Suspension Performance: Ensures proper alignment and operation of the strut assembly.
• Noise Reduction: Eliminates knocking sounds caused by worn strut mounts.
• Improved Steering: Restores smooth and responsive steering performance.
• Durable Construction: Designed to withstand the stresses of everyday driving.
• OEM Quality Replacement: Direct fitment for BMW E39 and E52 models, ensuring compatibility and reliability.

Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

Kit Includes:

(2) Rear damping adjuster extension cables

Installation hardware and Allen key

A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
1995-2001 E38 BMW 740i 740iL 750iL