Best Mods to add to your E9x M3!

ECS Exclusive Proudly Offered at Turner Motorsport!

Add-on diffuser to deliver a true motorsport look to your M3. Fastened seamlessly to the bottom of the rear bumper giving a platform to show off your exhaust and complete the rear end of the E92.

The E92 M3 is an amazing looking car right out of the box but a common BMW issue is the height of the front vs rear bumpers. As far back as the E30, the front bumper is much lower than the rear bumper and the E92 M3 faces the same issue. With this problem the front bumper is always super low to the ground and the rear bumper looks in-complete. The ECS add-on diffuser is a unique option for balancing out the rear bumper with the height of the front bumper for a full and complete look. The E92 diffuser also features an optional center fin design to dial in the aesthetic you prefer!

Give your M3 that wild style that stands out from the crowd, and obtain a nice balanced look. This is just the start of a new line of Street Flow Diffusers diffusers that are a must have extension of your awesome ride. The diffusers come powder coated in a sleek satin-black finish, are a blast to install and fit seamlessly against the rear bumper for a professional looking install every time. The Street Flow diffuser attaches below your factory rear diffuser and exhaust of your choosing to fill out the rear end for a nice full and aggressive styling profile.

Lets take a trip together down a new and unique path. Over the years ECS has designed factory replacement ABS and Carbon Fiber diffusers for all different models of BMW's. For the factory replacements ECS focus was to take the oem characteristics and add a twist and really bring out a more aggressive look with a direct replacement diffuser. For their new line of diffusers, us as car enthusiasts wanted to design a set of diffusers that really pushed the envelope and stepped outside of the comfort zone. ECS's new line of add-on diffusers is a result of the engineering team and fellow enthusiasts spending time study the M3 chassis, modeling different designs, testing prototypes and making changes to get a final product that we are extremely excited to offer. The E92 M3 Street Flow Diffuser is part of a new line of diffusers. Check out the diffusers in the line-up including the E36 and the E46 M3 variations!

Features:

Optional center fin included
Adds an aggressive aesthetic in addition to the subtle factory rear diffuser
Lightweight and durable 10ga aluminum in satin black powder coat to blend with the factory trim color
Installation is secure and simple with ample adjustability built in for perfect fitment
Design:

10 ga 5052 aluminum construction
Black satin powder coat for long term corrosion resistance
5 piece design to simplify installation
Slotted mounting locations to allow for mounting adjustment
Laser cut ECS logo pre powder coat for a smooth finish
Hidden hardware for better aesthetic

Unmatched quality and appearance. Our unique carbon front lip is a fully boxed in design for increased durability, fit, and finish. The fully boxed in design means that this lip not only has a smooth high gloss top and side appearance but also features a high gloss plane on the underside of the lip, having the fully completed underside does a great job to not only look and feel great but to reinforce the front, back, and top of the lip for the maximum amount of strength.

Our new carbon front lip completely transforms the front end of your M3. This aesthetic piece is crafted of hand-laid 3mm twill carbon with an extremely high gloss finish. Unlike other carbon front lips for your M3 this is a fully boxed in design for maximum strength and an awesome unboxing experience. Most carbon fiber lips on the market are just carbon laid over a mold and feature an unfinished bottom edge and bare carbon on the back side. The Turner carbon fiber lip features finished high gloss carbon 360 degrees around with a rigid shell design that feels great while installing. Step aside carbon fangs, our new carbon front lip from is here to become the new "must have" aesthetic component for your E90 M3.

A one-of-a-kind front lip that can be appreciated on the track or the streets, and has the looks of a true classic that will quickly become standard equipment for all M3 owners. When going after the perfect design for the E90 M3 front lip, our goal was not to add another feature and over complicate an already perfect body styling, but to amplify the car's natural beauty. A subtle yet life changing flat plane front lip with the curb appeal that it carves the road ahead of you, like a hot blade through butter.

Once you see an M3 with our front lip, you will no longer think the front end is complete without it. Rounding out the near perfect car, this front lip completes the front end by filling out the open space underneath and sets the stage to enjoy the timeless body styling incorporating a curvature that compliments the front bumper.

Features & Benefits:

High-Gloss
Beautiful flowing carbon weave
Strong and lightweight
Updates the bumper with carbon appearance that enhances the existing body lines
Motorsport styling
Enhanced lowered appearance
Designed to fit with both the factory skid plate and the Turner Motorsports upgraded skid plate
Design:

CAD designed in-house for precision fitment
3mm 2x2 carbon fiber shell securely mounted at strong mounting points along the whole surface where the lip mates to the bumper
Front leading edge helps compliment and accentuate the forgotten body lines to add an aggressive yet subtle flare to the front end
Attaches to the front bumper with self tapping screws, plastic riv-nuts and 6mm 3m adhesive tape to securely mount
Installation hardware included
Installation:

Mounts to the bumper using factory hardware combined with self tapping screws, two plastic riv-nuts and bolts for securing the center posts. Requires drilling the underside of the bumper.

Enhance your BMW E9X M3's braking performance with the comprehensive ECS Performance Brake Kit, ideal for both street and track applications. Engineered to deliver exceptional stopping power without compromising compatibility with factory 19" wheels, this kit is a game-changer in terms of both form and function.

• Enhanced Brake Cooling: Enjoy a 50% increase in brake cooling and heat carry capacities for improved performance.
• Eye-catching Calipers: Vibrant blue Brembo 6-piston calipers adorned with ///M logos offer a stunning visual behind your wheels.
• Simple Installation: No vehicle modifications necessary, making installation as straightforward as a standard brake service.
• Factory Wheel Compatibility: Fits perfectly under factory 19" Style 219 front wheels, with fitment guidance provided for other wheel types.
• Included Components:
  • Genuine F10 M5/Brembo 6-piston calipers
  • ECS Tuning 2-piece 382x36mm rotors
  • ECS Tuning Exact-Fit brake lines and stainless steel rotor set screws
  • Pentosin Super DOT4 brake fluid
  • Hardware & pad wear sensors for the front

The rear segment of this kit includes ECS 2-piece rotors, Cool Carbon Performance brake pads, and ECS Exact-Fit brake lines, completing the comprehensive upgrade for consistent and reliable braking power.

Installation Note: Front brake kit reuse factory brake dust shields; slight bending of caliper dust shields is required.

Ensure proper torque values during installation:

• Bracket to knuckle: 110Nm
• Caliper to bracket: 115Nm

CSF is one of the premier cooling product specialists available on the market today. One item that is often overlooked is the oil cooler. Luckily CSF has taken up the task of upgrading the oil cooler as well. If the oil runs too hot, it can lead to a reduction in wear protection and damage to the head, block, or the turbo system. This unit has 8 cooling cores and still fits in the stock location without any issues.

Fits the following BMW:
2008-2013 E9X BMW M3

M3 upper and lower control arms are a known upgrade for non-M E82 and E9X chassis. But our Monoball Thurst Arms are even more of an upgrade over the stock M3 arms. This package bundles the Turner Monoball upper thrust arms with the stock M3 lower control arms. If there's one big fail point in the E82/E9X front suspension it's the thrust arms. The front inner thrust arm bushing is filled with dampening fluid that leaks over time. Once it's gone the bushing has the strength of a rubber band. Even though we sell two types of upgraded rubber bushings there was still room for improvement. For someone looking for superior performance and longevity these sealed monoball bushings are the best out there. 

The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings, including the M3, move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. And when worn out, performance suffers. Our monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

The lower M3 control arm bushings use a similar sealed monoball bushing instead of rubber. This package gives you monoball precision and performance with OE-quality components.

This item fits the following BMWs: 
2008-2012 E82 BMW 128i 135i 1M Coupe 
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan 
2006-2012 E91 BMW 328i - Wagon 
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe 
2007-2013 E93 BMW 328i 335i M3 - Convertible 
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is 

We design our carbon fiber mirror caps to be a direct OEM replacement. All replacement parts are made with 100% non-recycled raw plastic to ensure that the clips and tabs will not break off easily. Includes one pair of passenger and driver side direct OEM replacement mirror covers.

Install involves removing factory mirror covers and replacing with new carbon fiber mirror caps.

This product fits the following BMWs:
E90 M3
E92 M3
E93 M3
E82 1M

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

• 7k Front & 14k Rear Spring Rate
• S-Barrel front & Linear rear springs
• Valved specifically to spring style and rate
• Camber Plate Front Mounts
• Aluminum and Rubber Rear Mounts
• Black Powder Coated Components
• All OE style brackets and mounting for perfect fit
• 30 Levels of Simultaneous Compression and Rebound Dampening
• 2 inch minimum and 3+ Inches of total potential drop
• Great for Track, Street, and any other conditions

The ECS Tuning Center Support Bearing Brace is engineered to improve drivetrain performance and longevity. The factory center support bearing features internal an internal rubber bushing to reduce NVH (noise, vibration, and harshness) transmission to the cabin. Unfortunately, this material choice falls short when it comes to performance applications. Under extreme load conditions, this bushing is prone to flexing, resulting in driveshaft misalignment. To address the shortcomings of the factory rubber center support carrier design, ECS engineers developed a set of precision-fit, split polyurethane bushings that secure tightly around the existing driveshaft bearing. Constructed from 90A durometer polyurethane, this material eliminates bushing deflection while maintaining minimal noise, vibration, and harshness (NVH). By eliminating deflection, this innovative solution not only improves durability but also ensures a significantly longer service life than the OEM center support bearing—making it an excellent upgrade for aging BMW chassis.

The polyurethane bushings are surrounded by a robust 6061-T6 billet aluminum bracket designed with strength and reliability in-mind. This bracket features a split design for hassle-free installation, eliminating the need to remove the driveshaft assembly entirely. To install the ECS Center Support Carrier, simply cut around your existing bearing, remove the factory brace, and clamp on your new bushings and bracket. This user-friendly approach saves time and simplifies maintenance or upgrades. Two stainless steel socket head screws are used to fasten the two-piece bracket, offering corrosion resistance and secure clamping under high torque and stress. This combination of materials and design ensures dependable performance and long-lasting durability, even in demanding applications.

Features & Benefits:

Performance-Designed Bushing Upgrade: 90A durometer polyurethane is used to eliminate bushing deflection while maintaining a smooth, quiet ride. Improved Longevity: Polyurethane construction offers a longer lifespan than factory rubber, ideal for enthusiasts looking to eliminate future CSB-related problems. Billet Aluminum Bracket: The upgraded bushings are encased in a 6061-T6 billet aluminum bracket for enhanced durability and improved performance. Easy Installation: Both the bushings and the bracket feature a two-piece split design, allowing for seamless installation without driveshaft removal. Reduce Deflection, Increase Rigidity: Designed with performance in mind, this upgrade eliminates excessive driveshaft movement for improved alignment and efficiency. Kit Includes:

ECS Driveshaft Center Support Bushings ECS Driveshaft Center Support Carrier (2) Stainless Steel Hex Head Screws (2) Hex Bolts (22326760945) Medium Strength Threadlocker (0.5ml)