BMW Engine Performance Packages for BMW 3 Series E36 (1992-1998)

E36 325i/is 93-94 Stage 1 Turner Motorsport Performance Package ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2843

Part#: TMS2843

In Stock

Sale - Save 5% $ 686.00

This product was last offered at the strikethrough price on
05-03-2026

$ 651.70 USD

Add to Wish List

Qty

Sale - Save 5%

$ 686.00

This product was last offered at the strikethrough price on
05-03-2026

$ 651.70 USD

Add to Wish List

1993-94 E36 325i/is Stage 1 Performance Package
Peak Power Gain: +27hp / +25ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe cold air intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our TMS Performance Chips were also developed by Jim Conforti. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1993-94 E36 325i/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
TMS Performance Chip

Applications:
1993-94 E36 325i, 325is, 325ic

Show More Show Less

E36 325i/is 95 Stage 1 Turner Motorsport Performance Package ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340153

Part#: TMS2844

In Stock

Sale - Save 15% $ 845.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 719.09 USD

Add to Wish List

Sale - Save 15%

$ 845.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 719.09 USD

Add to Wish List

1995 E36 325i/is Stage 1 Performance Package
Peak Power Gain: +27hp / +25ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFE uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our TMS Performance Chips were also developed by Jim Conforti. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1995 E36 325i/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
TMS Performance Chip (we need your car's production date, choose from below)

Applications:
1995 E36 325i, 325is, 325ic

Show More Show Less

E36 325i/is 95 Stage 3 Turner Motorsport Performance Package ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338677

Part#: TMS2906

In Stock

Starting at $ 387.00 USD

Add to Wish List

Starting at $ 387.00 USD

Add to Wish List

1995 E36 325i/is Stage 3 Performance Package
Peak Power Gain: +40hp / +32ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 3 kit features a cold-air intake kit, cat-back exhaust, performance software, and is tuned for stock M3 cams (not included in Package, can be added below). This whole package has been precisely tuned to work together and make the most power with as little downside.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

We can supply this Package with either a Borla or Corsa exhaust system. Both are stainless steel cat-back sections with dual tips. The Borla is a little more mellower sound than the Corsa. The Corsa makes a deep, aggressive burble that is a bit on the loud side but not over-the-top. Both are very light weight with the Borla weighing only 28lbs.

The difference between Stage 2 and Stage 3 is that the software we supply is also tuned for the M3 camshaft upgrade. Adding the stock cams from the S50 and S52 M3 engine is a big wake-up call on the 325i motor. You can expect big power gains in the top end. The M3 cams are a perfect blend of power and driveability - you lose almost nothing in low-end torque.

Our TMS Performance Chips include specific tuning for each part of the Package. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: Within any Stage, we recommend our Underdrive Power Pulley Kit. The Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1995 E36 325i/is Stage 3 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Borla or Corsa Exhaust
TMS Stage 2 Performance Chip (tuned for intake, exhaust, M3 cams)

E36 M3 Camshafts
We sell this Package without cams. Used M3 cams can be found from various sources (eBay, forums, etc). We can supply you with new, factory M3 cams or the Schrick equivalent (same specs as factory M3). Select one of these options below.

Applications:
1995 E36 325i, 325is, 325ic

Show More Show Less

E36 328i/is 96-99 Stage 1 Turner Motorsport Performance Package ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2845

Part#: TMS2845

In Stock

Sale - Save 3% $ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

Qty

Sale - Save 3%

$ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

1996-99 E36 328i/ic/is Stage 1 Performance Package
Peak Power Gain: +17hp / +12ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe coil air intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1996-99 E36 328i/ic/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1996-1999 E36 328i sedan, 328i cabrio, 328is coupe

Show More Show Less

E36 323iC/323is Stage 1 Turner Motorsport Performance Package ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2531

Part#: TMS2531

In Stock

Sale - Save 3% $ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

Qty

Sale - Save 3%

$ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

1998-99 E36 323ic/is Stage 1 Performance Package
Peak Power Gain: +20hp / +20ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe Cold Air Intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cottonair filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1998-99 E36 323ic/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1998-1999 E36 323i cabrio, 323is coupe

Show More Show Less

E36 M3 96-99 Stage 1 Turner Motorsport Performance Package

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4158

Part#: TMS-I3MS41

In Stock

Sale - Save 3% $ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

Qty

Sale - Save 3%

$ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD

Add to Wish List

1996-99 E36 M3 Stage 1 Performance Package
Peak Power Gain: +10whp / +10wft-lbs
Rev limit: 7000
Octane: 91 or higher

Stage 1 Performance Package includes:
aFe Cold Air Intake (high-flow filter, heat-blocking coated filter shield, molded intake tube)
Conforti Shark Injector performance software

Our base Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe air filter benefits from a heat blocking shield - drawing cool air from the factory intake ducts to feed the engine. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and tuned to work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice. This Package can be upgraded to Stage 2 by adding the larger HFM, "24lb" fuel injectors, a larger air intake kit, and Stage 2 software.

Related Upgrades -
Underdrive Power Pulley Kit - Underdriving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10hp at the wheels.
Exhaust - Borla or Corsa cat-back muffler for more performance, lighter weight, and a more-aggressive sound. Expect a gain of 5whp with either of these exhausts.

This item fits the following BMWs:
1996-1999 E36 M3 (manual transmission)
1996-1999 E36 M3 (automatic transmission)

Show More Show Less

E36 325i/is 92 Stage 1 Turner Motorsport Performance Package ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340151

Part#: TMS2842

In Stock

Sale - Save 5% $ 636.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 604.20 USD

Add to Wish List

Sale - Save 5%

$ 636.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 604.20 USD

Add to Wish List

1992 E36 325i/is Stage 1 Performance Package
Peak Power Gain: +16hp / +24ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our base Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe air filter benefits from a heat blocking shield - drawing cool air from the factory intake ducts to feed the engine. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our TMS Performance Chips were also developed by Jim Conforti. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades -
Underdrive Power Pulley Kit - Underdriving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10hp at the wheels.
Exhaust - Borla or Corsa cat-back muffler for more performance, lighter weight, and a more-aggressive sound. Expect a gain of 5whp with either of these exhausts.

1992 E36 325i/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
TMS Performance Chip (need to specify your car's DME number in the order)

Applications:
1992 E36 325i, 325is

Show More Show Less

E36 325i/is 93-94 Stage 3 Turner Motorsport Performance Package ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338676

Part#: TMS2902

Ships in 10 Business Days

Sale - Save 5% $ 2,183.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,074.79 USD

Add to Wish List

Sale - Save 5%

$ 2,183.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,074.79 USD

Add to Wish List

1993-94 E36 325i/is Stage 3 Performance Package
Peak Power Gain: +40hp / +32ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 3 kit features a cold-air intake kit, cat-back exhaust, performance software, and is tuned for stock M3 cams (not included in Package, can be added below). This whole package has been precisely tuned to work together and make the most power with as little downside.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

We can supply this Package with either a Borla or Corsa exhaust system. Both are stainless steel cat-back sections with dual tips. The Borla is a little more mellower sound than the Corsa. The Corsa makes a deep, aggressive burble that is a bit on the loud side but not over-the-top. Both are very light weight with the Borla weighing only 28lbs.

The difference between Stage 2 and Stage 3 is that the software we supply is also tuned for the M3 camshaft upgrade. Adding the stock cams from the S50 and S52 M3 engine is a big wake-up call on the 325i motor. You can expect big power gains in the top end. The M3 cams are a perfect blend of power and driveability - you lose almost nothing in low-end torque.

Our TMS Performance Chips include specific tuning for each part of the Package. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: Within any Stage, we recommend our Underdrive Power Pulley Kit. The Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1993-94 E36 325i/is Stage 3 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Borla or Corsa Exhaust
TMS Stage 2 Performance Chip (tuned for intake, exhaust, M3 cams)

E36 M3 Camshafts
We sell this Package without cams. Used M3 cams can be found from various sources (eBay, forums, etc). We can supply you with new, factory M3 cams or the Schrick equivalent (same specs as factory M3). Select one of these options below.

Applications:
1993-94 E36 325i, 325is, 325ic

Show More Show Less

E36 325i/is 93-94 Stage 2 Turner Motorsport Performance Package ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340152

Part#: TMS2891

Ships in 10 Business Days

Sale - Save 3% $ 2,106.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,043.78 USD

Add to Wish List

Sale - Save 3%

$ 2,106.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,043.78 USD

Add to Wish List

1993-94 E36 325i/is Stage 2 Performance Package
Peak Power Gain: +30hp / +28ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 2 kit featuring a cold-air intake kit, cat-back exhaust, and performance software. All three of these pieces have been precisely tuned to work together and make the most power with as little downside.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

We can supply this Package with either a Borla or Corsa exhaust system. Both are stainless steel cat-back sections with dual tips. The Borla is a little more mellower sound than the Corsa. The Corsa makes a deep, aggressive burble that is a bit on the loud side but not over-the-top. Both are very light weight with the Borla weighing only 28lbs.

Our TMS Performance Chips include specific tuning for each part of the Package. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: Within any Stage, we recommend our Underdrive Power Pulley Kit. The Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1993-94 E36 325i/is Stage 2 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Borla or Corsa Exhaust
TMS Stage 2 Performance Chip

Applications:
1993-94 E36 325i, 325is, 325ic

Show More Show Less

E36 325i/is 95 Stage 2 Turner Motorsport Performance Package ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340154

Part#: TMS2904

Ships in 10 Business Days

Sale - Save 3% $ 2,096.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,034.08 USD

Add to Wish List

Sale - Save 3%

$ 2,096.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,034.08 USD

Add to Wish List

1995 E36 325i/is Stage 2 Performance Package
Peak Power Gain: +30hp / +28ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 2 kit featuring a cold-air intake kit, cat-back exhaust, and performance software. All three of these items have been precisely tuned to work together and make the most power with as little downside.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

We can supply this Package with either a Borla or Corsa exhaust system. Both are stainless steel cat-back sections with dual tips. The Borla is a little more mellower sound than the Corsa. The Corsa makes a deep, aggressive burble that is a bit on the loud side but not over-the-top. Both are very light weight with the Borla weighing only 28lbs.

Our TMS Performance Chips include specific tuning for each part of the Package. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: Within any Stage, we recommend our Underdrive Power Pulley Kit. The Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1995 E36 325i/is Stage 2 Performance Package includes:
aFe Cold Air Intake (oiled cotton air filter, heat shield, intake tube)
Borla or Corsa Exhaust
TMS Stage 2 Performance Chip

Applications:
1995 E36 325i, 325is, 325ic

Show More Show Less

E36 328i/is 96-99 Stage 3+ Turner Motorsport Performance Package ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2896

Part#: TMS2896

Ships in 1 Business Day

Sale - Save 3% $ 1,154.95

This product was last offered at the strikethrough price on
05-03-2026

$ 1,120.30 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,154.95

This product was last offered at the strikethrough price on
05-03-2026

$ 1,120.30 USD

Add to Wish List

1996-99 E36 328i/ic/is Stage 3+ Performance Package
Peak Power Gain: +34hp / +12ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 3+ kit is setup around the best upgrades to make power on the M52 engine: cold-air intake kit, M50 manifold, M3-spec cams, and performance software.

We sell this kit a number of different ways. The base Stage 3+ Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
M50 manifold adapter kit (M50 manifold not included)
TMS Shark Injector performance software

Optional Items:
New stock E36 M3 camshafts (or Schrick equivalent)
M50 manifold
Modified fuel rail cover (clears the fuel injectors with M50 manifold)

Adding the M50 manifold produces huge power gains in the upper RPM. If you spend the majority of your time over 5000 RPM, you're going to love this kit. The parts in Stage 3+ are our most-popular performance upgrades for the E36 328i: intake, cams, software, complemented by the M50 manifold. Stage 3+ shifts the focus entirely to the top end of the RPM. With the change in the manifold there is not much of a mid-range torque increase. The Conforti software keeps any torque loss to a minimum.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, carbon fiber intake tube, sealing materials, hardware, and install instructions.

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1996-99 E36 328i/ic/is Stage 3+ Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
M50 manifold adapter kit (M50 manifold not included)
Shark Injector Stage 3+ performance software

This Package requires additional parts, sourced or sold separately:
Stock E36 M3 camshafts (or Schrick equivalent)
Modified fuel rail cover (clears the fuel injectors with M50 manifold)
M50 manifold
TMS can supply all of these parts for you or you can source your own. Contact us before or after your order about the availability and cost of these parts.

Applications:
1996-1999 E36 328i sedan, 328i cabrio, 328is coupe

Show More Show Less

E36 M3 95 Stage 1 Turner Motorsport Performance Package

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340160

Part#: E36EURO-ST1

Ships on Nov 27, 2026

$ 1,208.99

This product was last offered at the strikethrough price on
02-18-2026

Starting at $ 588.21 USD

Add to Wish List

Starting at $ 588.21 USD

Add to Wish List

E36 M3 OBD-I Stage 1 Performance Package
Peak Power Gain: +32hp / +23ft-lbs
Rev limit: 7000
Octane: 91 or higher

A fantastic upgrade package for the 1995 3.0-liter E36 M3! This special package combines some of our most popular upgrades for a lot of horsepower and less money!!! It�s a great bolt-on first step for big power gains without having to go into the engine for cams or head work.

We use the aFe 'Euro' Intake Kit, Bosch Euro HFM, and a special Conforti-TMS Performance Chip. This package retains the 3.0�s stock 17lb injectors (green top). The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. The aFe Intake uses an oiled cloth air filter for maximum air flow and excellent filtration.

With the undersized stock air sensor, the M3 is gasping for breath. But with the larger 3.5� Euro HFM and Euro Intake, the M3�s engine can breathe a lot better. This kit works on all M3s with the US S50 3.0-liter engine. It will also work on the S52 3.2 if OBD-1 17lb injectors are used.Our TMS Performance Chips were also developed by Jim Conforti and tuned specifically for the Euro HFM and aFe Intake. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

Clickhere for feedback on this package.

1995 M3 Stage 1 Engine Upgrade Kit includes:
aFe 'Euro' Cold Air Intake
Euro 3.5" Bosch HFM / Mass Air Sensor
TMS Performance Chip (we need your car's production date, choose from below)

This kit is based on the 1995 M3's 17lb fuel injectors. If you have upgraded to 21.5lb injectors or are running a S52 3.2, see the Stage 1.5 Kit below. The 17lb injectors are barely adequate with the variable quality of fuel in the USA. Larger injectors are recommended to ensure enough high-quality octane to prevent knocking/detonation.

Applications:
1994-1995 E36 M3 3.0 liter

Show More Show Less

E36 M3 95 Stage 1.5 Turner Motorsport Performance Package

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338686

Part#: E36EURO-ST1.5

Back Ordered

Sale - Save 20% $ 1,447.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,158.39 USD

Add to Wish List

Sale - Save 20%

$ 1,447.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,158.39 USD

Add to Wish List

E36 M3 OBD-I Stage 1.5 Performance Package
Peak Power Gain: +32hp / +23ft-lbs
Rev limit: 7000
Octane: 91 or higher

This Stage 1.5 Package adds the option of larger 21.5lb fuel injectors to the Stage 1 Euro HFM kit. The 21.5lb injectors (23lb at BMW's 3.5 bar) were standard on the S52 3.2-liter engines. Because that engine has found its way into many other E36s, we put this kit together to use the Euro HFM, intake, and the stock 3.2 injectors. Also, it's been necessary for some people to add more fuel to account for cleaner-burning gasoline used in the US. With the lower grade fuel, pinging, knocking, or lean conditions may be experienced with the stock 3.0 injectors. The issues people are having seem to be geography-related (California, the Northeast, etc.) but many people feel safer having a fuel 'safety net' and this Package meets their goals. We also offer a Stage 2 Package with 24lb injectors if these are still not flowing enough fuel. There is no performance gain with only adding the 21.5lb injectors.

We use the aFe 'Euro' Intake Kit, Bosch Euro HFM, Bosch 21.5lb injectors, and a special TMS Stage 1.5 Performance Chip. The aFe intake is made with heat-blocking materials, reducing underhood emperatures and not contributing to heat soak of the air filter. The aFE intake uses an oiled cotton air filter for maximum air flow and excellent filtration.

With the undersized stock air sensor, the M3 is gasping for breath. But with the larger 3.5� Euro HFM and Euro Intake, the M3�s engine can breathe a lot better. This kit works on all 1995-1999 M3s with the US S50 3.0-liter or S52 3.2-liter engine (and using OBD-I engine computer).Our TMS Performance Chip is tuned specifically for the Euro HFM, aFe Intake, and 21.5lb injectors. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management.

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

Clickhere for feedback on this package.

E36 M3 Stage 1.5 Engine Upgrade Kit includes:
aFe 'Euro' Cold Air Intake (filter, heat shield, intake tube)
Bosch Euro M3 HFM
HFM adapter
TMS Performance Chip (we need your car's production date, choose from below)

21.5lb Fuel Injectors
This kit is sold without the fuel injectors but we can sell you a new set. Select the option below if you would like new Bosch injectors sent with your order. Otherwise, all M52 2.8 and S52 3.2 liter engines came with them so there are lots of used injectors available from eBay, forums, Craigslist, etc.

Applications:
1995 E36 M3 3.0 (21.5lb injectors required) (manual transmission only)
1996-99 E36 M3 3.2 (manual transmission only) only for cars with OBD1 conversion
any S50 or S52 with OBD-1 in an E36 (330i, 332i, 332ti, etc)

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Performance Packages for BMW 3 Series E36 (1992-1998)

E36 325i/is 93-94 Stage 1 Turner Motorsport Performance Package ...

E36 325i/is 95 Stage 1 Turner Motorsport Performance Package ...

E36 325i/is 95 Stage 3 Turner Motorsport Performance Package ...

E36 328i/is 96-99 Stage 1 Turner Motorsport Performance Package ...

E36 323iC/323is Stage 1 Turner Motorsport Performance Package ...

E36 M3 96-99 Stage 1 Turner Motorsport Performance Package

E36 325i/is 92 Stage 1 Turner Motorsport Performance Package ...

E36 325i/is 93-94 Stage 3 Turner Motorsport Performance Package ...

E36 325i/is 93-94 Stage 2 Turner Motorsport Performance Package ...

E36 325i/is 95 Stage 2 Turner Motorsport Performance Package ...

E36 328i/is 96-99 Stage 3+ Turner Motorsport Performance Package ...

E36 M3 95 Stage 1 Turner Motorsport Performance Package

E36 M3 95 Stage 1.5 Turner Motorsport Performance Package

Select Vehicle

Category

Price

Special Offers

Shipping

Narrow Results